↧
client will not go to virtual partition, with pxe it works
↧
Ghost Solution Suite won't install
↧
↧
Problem Creating Server Image
I need a solution
We have recently purchased a number of HP ProLiant DL360e Gen8 servers and would like to create a master image using GhostCast Server 11.5.1.2266. On reboot, however the server is failing to connect with the GhostCast Server. I've ruled out the network/DHCP issues. Is there anything special I need to do to send the image?
↧
Ghost won't start when using Linux PXE boot
I need a solution
I gathered information from this other post with a similar problem but no solution.
http://www.symantec.com/connect/forums/ghost-wont-...
The PXE load linux kernel, there's a xterm console but I cant launch ghost.
↧
Intel I217-LM driver for WinPE (Vista) or other solution
I need a solution
Hi All
I am having trouble creating a WinPE boot disk that supports the Intel I217-LM NIC using Ghost Suite 2.5.1
Apprently there is no Vista support for this NIC. Anyone have any ideas on how to get a Vista driver that works
or some other workaround? I have managed to find a DOS driver that wokrks but restore speed is slow (200mb\min)
↧
↧
GSS Local Path Evaluation Failed
I need a solution
I'm using GSS 2.5 and when I try to run tasks that use an image on the client the local path evaluation fails with the message "Disk attributes evaluation failed to find a matching volume label".
↧
Will GhostCast Server w/ PXE works faster on an SSD?
I need a solution
Will GhostCast Server w/ PXE works faster on an SSD? My current server has 1tb HDD = two 500gb on RAID and I was just wondering if it will be faster to burn laptops if I upgraded my server to an SSD. I usually burn about 30 to 50 laptops at a time. The more sessions I make the slower it is.
↧
Pre set boot partition & hidden partition size
I need a solution
My current setting has three partitions.
C: 60GB
Hidden: 10GB (backup of C: & D:)
D: Whatever left of C: partition + Hidden (250GB - C: - Hidden = 180GB)
The original disk image was based on a 250GB HDD. The new HDD now is 500GB. When I restored the origina disk image to 500GB, Ghost resized the following:
C: 202GB
↧
Ghost Boot Builder WinPE Driver Issue - Emulex
I need a solution
I am having an issue with the Emulex NIC driver on the IBM HS23 blade. No error message, but the driver is not binding to the NIC. I have stripped out all but the default drivers on the PE image. I have successfully loaded the Emulex driver manually. I have tried at least 8 different driver versions. But the driver still does not bind to the NIC.
↧
↧
How to use WINPE 3.0 and Console (from scratch)
Most of the latest machines use Intel I series NICs ,for which Vista drivers are not available.Since Ghost Solution Suite has WINPE 2 ,which is a lighter version of Vista ,these models cannot be imaged over the network.The need is to use a different version of WINPE for network imaging.
Below are the steps to use WINPE 3.0 and Console. Start to finish.
↧
We are waiting for a new version of GHOST for years, when it will be available?
I need a solution
We are waiting for a new version of GHOST for years, when it will be available?
↧
"Waiting for Ghostcast session to start".. FIXED.
↧
Ghost Console Client Version mismatch
I need a solution
I recently migrated our ghost server to a new dell poweredge. The migration went well using the scripts provided by a community member to backup and migrate the database. All my machines show up and I can run tasks successfully. I Do however always get a warning about running a product update which always fails to run. This does not keep tasks from completing.
↧
↧
Unable to connect to Ghost Cast Server to take Image
I need a solution
I recently installed Symantec Ghost Console 11.5.1.2266 on a Windows 2008 R2 server.
I am now trying to take an image of our new laptops HP ProDesk 600 (Windows 7 64Bit, NIC i217-LM) and the HP EliteBook 850 (Windows 7 64Bit, NIC i218-LM).
I downloaded the NIC drivers from here....
↧
How can I add USB3 support to a Ghost Boot Disk
I need a solution
Hey guys,
I'm trying to add the drivers for a USB3 device using the storage drivers section of the Ghost Boot wizard, but when I select the folder with the drivers, it says it did not find any drivers in that folder.
By tyhe way, I want to add USB3 because I want to use an external hard drive to create the image into.
What can I do?
Thanks
↧
GPT-Formatted Disk Error - Help!
I need a solution
Getting a GPT-Formatted disk error..saying legacy boot not supported. I
created an image...captured the image and trying to reimage the computer (any
of the new models) and we get this error. The computer is a HP ProDesk 600 G1
with i7 processor, 500GB HDD, 8GB RAM. I also created a new image with this
↧
ghost 12 slow multicasting
I need a solution
im using server 2012 to deploy ghost images using wds and windows pe version 5 i noticed that when i deploying image using ghost 12 with uefi support there are delays in packetes send to the destination computer it take 6 seconds or more my question is it normal?
↧
↧
OS volume not consistant with the local
I need a solution
Hi,
I am working on proliant server ML310eGen8V2, which only contain one 500G HD drive with Raid configuration disabled.
I installed the OS to this HD and want to create image by using Ghost WinPE3.
↧
How to do an unattended install of Ghost
I need a solution
Hi Everyone,
I really need simple and clear instrcutions on how to create a file for unattended installations of Ghost.
We have a Ghost image on all our PC's ( D drive) that we can select if the PC needs to be rebuilt. This Ghost image is displayed as an option under the Windows Operating System when the PC boots up.
↧
Upgrade to WinPE 5.xxx
↧